350-Ton Flush Mounted Spider

The McCoy smartFMS, available from Derek Casing Services for suitable casing jobs.

Derek Casing Services has McCoy smartFMS flush mounted spiders available as part of our casing-running capability. This hydraulic spider sits flush inside the rotary table and holds the string while reacting back-up torque on its own, which means fewer hands near the slips, no manual back-up tongs and faster connections from the first joint.

350 tons Up to 50,000 ft-lbs 2⅜" – 13⅝" 6 seconds
Max tension rating
Max back-up torque (varies by casing size)
Casing grip range (with matching die carriers)
Extend and retract

What Is a Flush Mounted Spider?

A flush mounted spider is a hydraulic slip system that drops into the rotary table and sits level with the rig floor. While each new joint is made up, it grips the pipe and carries the full weight of the string below it.

A conventional spider sits on top of the rotary table. That raises the working height, often calls for a work stand, and needs a separate back-up tong to hold the pipe while the connection is torqued. A flush mounted spider removes all three problems.

The smartFMS takes it a step further. Its die carriers grip the pipe hard enough to hold back-up torque themselves, so the tong on top can make up the connection without anything holding the pipe from below. With the right die carriers fitted, the same tool handles both casing and drill pipe.

services

wanted to work with us ?

Get in touch with our team today to learn how we can optimize your next project

Safer, Faster Casing Runs

Safer rig floor

The slips open and close by hydraulics, so no one has to set them by hand. With no back-up tong and no work stand, crew members spend less time in pinch points and around rotating pipe.

Faster connections

The slips extend and retract in 6 seconds. Back-up torque is available from the first joint, so the crew isn't waiting on extra equipment between connections.

One tool, more jobs

With the matching die carriers and guide plates, the same spider grips casing from 4" to 20" and can handle drill pipe. Fewer tool changes means less rig-up time and less equipment on location.

Flexible Hydraulic Setup

Each DCS FMS unit is controlled from its own operating panel. It can run on our own hydraulic supply or connect to the rig's hydraulics, depending on the rig and job setup. We confirm the arrangement with you when planning the job.

Specification Imperial Metric Notes
Maximum tension rating
350 tons
317 tonnes
Rating drops for smaller casing sizes; see table below
Maximum working pressure
2,000 psi
13,790 kPa (138 bar)
Flow rate required
34 gpm
128 L/min
Supplied by DCS’s hydraulic supply or the rig’s hydraulics
Mass (tool only)
2,900 lb
1,315 kg
Mass (with carriers and guide plates)
3,050 – 3,700 lb
1,383 – 1,678 kg
Varies with the carriers and guide plates fitted
Extend and retract time
6 seconds
6 seconds
Rotary table
27½″; 37½″ with adapter ring
Same
Casing size range
2⅜″ – 13⅝″
60 – 346 mm
Depends on the die carriers and guide plates fitted
Maximum back-up torque
Up to 50,000 ft-lbs
Up to 67,791 N·m
Depends on casing size; see table below

All figures are McCoy’s published ratings for the smartFMS 350 Ton, the model DCS operates. Back-up torque, grip range and mass depend on casing size and the die carriers and guide plates fitted.

Official McCoy specifications:

Available as Part of Our Casing-Running Capability

DCS has Flush Mounted Spider systems available as part of our casing-running capability. Suitability, equipment requirements and availability are assessed with the customer when planning each job.

Derek Casing Services owns these units and runs them with our own trained crews. When you plan a casing job with us, we'll review your casing program, rig and hydraulic setup together and recommend whether the FMS is the right fit.

Why Run It With Derek Casing Services

New equipment is only as good as the crew running it. DCS pairs the smartFMS with crews who put safety first on every connection.

TRIR
0
Kilometers Driven
0
Meters Run
0
Total Man Hours
0

Certifications and Memberships

What rotary table does the smartFMS fit?

The 500-ton smartFMS fits inside a 37½” rotary table.

What casing sizes can it handle?

From 4″ to 20″, depending on the die carriers and guide plates fitted. With the right carriers, it can also handle drill pipe.

Does it replace back-up tongs?

Yes. The spider holds back-up torque from the first joint, so no separate back-up tong is needed. Maximum back-up torque depends on casing size, up to 100,000 ft-lbs.

How much weight can it hold?

It has a maximum tension rating of 500 tons (454 tonnes). See the specification table and McCoy’s documentation for ratings by casing size.

What hydraulic supply does it need?

The FMS is controlled from its own operating panel and can run on our hydraulic supply or the rig’s hydraulics, depending on the setup. It requires 30 gpm, with a maximum working pressure of 3,000 psi.

Is the FMS used on every DCS casing job?

No. DCS has Flush Mounted Spider systems available as part of our casing-running capability. Suitability, equipment requirements and availability are assessed with the customer when planning each job.

Can I rent the spider on its own?

No. Our FMS units are run by DCS crews as part of our casing services.

Is it available for international work?

It can be. Suitability, equipment requirements and availability are confirmed when planning each project. See our International page or contact us for more information.

Is the smartFMS Right for Your Next Casing Run?

Tell us about your well, rig and hydraulic setup, and we’ll assess whether the smartFMS suits the job and confirm availability.